Product Information:

The IPVS4 Quad Channel MJPEG Server connects four analog CCTV video camera to an IP network allowing either an upgrade of an existing analog camera CCTV Video System to gain the benefits of an IP Network Video System, or by including existing analog CCTV cameras in an expanded IP Network Video System.MODEL- IPVS4 VENDOR- 4XEM CORP FEATURES- IPVS4 Four Channel MJPEG IP Network Video Server 4XEM’s IPVS4 Quad Channel MJPEG IP Network Video Server connects four analog CCTV video camera to an IP network. It protects your investment in CCTV Video by allowing you to either upgrade your existing analog camera CCTV Video System to gain the benefits of an IP Network Video System, or by including existing analog CCTV cameras in an expanded IP Network Video System. * High performance and fully configurable MJPEG compression engine * PPP dial-in and dial-out via external modem * Remote P/T/Z camera control * Flexible integration interface * 4 analog camera input, 4 analog video outputs * Video stream 30/25 frames/sec for single input, 6 frames/sec for Quad TCP/IP network remote video surveillance system. * Built-in web server * In-image motion detection — SPECIFICATIONs ———————————— ALARM FEATURES- Motion Detection with Percentage and Sensitivity : Yes Daily Repeat Timing Schedule : Yes 3 Color Images per Camera for Pre/Post Alarm : Yes Automatic Transfer of Stored Images via Email or FTP: Yes AUDIO – Frequency : 24 kbps CONNECTIVITY – Video Input : 4 analog video inputs Video Output : 4 loop-through outputs GENERAL I/O – Sensor Inputs : 4 sensor inputs max. 12V DC 50mA Relay Outputs : 2 relay outputs max. 24V DC 1A/125V AC 0.5A MISCELLANEOUS- Development Kit: Open ActiveX control LED Indicators : System power and status indicators, Network link and speed indicators. NETWORKING – Ethernet : 10baseT or 100baseT Fast Ethernet auto negotiation. Protocol : TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS and DHCP. Modem : PPP (dial-up, direct-cable connection) PAN/TILT/ZOOM- Multiple PTZ Camera Control Through RS232 or RS485: Yes CGI Command Serial Driver : Supported Supported Devices and Protocols : Sony VISCA, Canon VC-C1, VC-C3, VC-C4, Dynacolor DynaDome, Pelco D,